Using A Site Log - Cisco Gigabit Switch Router 12008 Installation And Configuration Manual

Using a Site Log

If you do not receive everything you ordered, contact a Cisco customer service
representative for assistance.
Using a Site Log
It is good practice to use a site log to record all actions taken relevant to router operation
and maintenance. Keep the site log near the router for ready access by the site manager or
other personnel.
Site log entries might include the following:
•
Installation progress—Make entries in the site log about any difficulties encountered
and the remedial steps taken during the installation process.
•
Upgrades and removal/replacement procedures—Make entries in the site log about
system maintenance activity and hardware/software upgrades.
Relevant items in the site log might include the following:
— Installation, removal, or replacement of an FRU
— Router configuration changes
— Software upgrades
— Hardware upgrades
— Corrective or preventive maintenance procedures
— Intermittent failures/problems
— Related comments
Figure 2-8 is an example of a typical site log. You can use this one or design one of your
own that meets the needs of your particular site.
2-28
Cisco 12008 Gigabit Switch Router Installation and Configuration Guide