Cisco Gigabit Switch Router 12008 Installation And Configuration Manual page 117

•
Provide a dedicated power source for each AC-input power supply installed in the
router.
•
Install an uninterruptible power source for your site, if possible.
•
Install proper site grounding facilities to guard against damage from lightning or power
surges.
For a listing of the electrical specifications for the AC-input power supply, see Table 1-9 in
Chapter 1.
Figure 2-5 lists the source AC power cords available for the Cisco 12008.
Figure 2-5 Types of Plugs for Source AC Power
North American plug
L6-20 20A
Italian plug
CEI 23-16/VII 10A
Table 2-1 lists the international options available for the source AC power cords.
Australian plug
AS 3112 10A
United Kingdom plug
BS 1363 13A
Site Requirements Guidelines
European plug
CEE 7/7 16A
Appliance coupler
Hot IEC 320 C-13 10A
Preparing for Installation 2-15