Cisco Gigabit Switch Router 12008 Installation And Configuration Manual page 249

•
For systems with Cisco IOS Release 11.2(8)GS or later, refer to the following modular
configuration and command reference publications, as appropriate, for your system
configuration:
— Configuration Fundamentals Configuration Guide
— Configuration Fundamentals Command Reference
— Wide-Area Networking Configuration Guide
— Wide-Area Networking Command Reference
— Network Protocols Configuration Guide, Parts 1, 2, and 3
— Network Protocols Command Reference, Parts 1, 2, and 3
— Configuration Builder Getting Started Guide
— Troubleshooting Internetworking Systems
— Debug Command Reference
— System Error Messages
— Cisco IOS Software Command Summary
— Cisco Management Information Base (MIB) User Quick Reference
•
For additional line card interface configuration information, refer to the following
publications:
— The configuration note Quad OC-3c/STM-1c Packet-Over-SONET Line Card
Installation and Configuration (document number 78-4333-02) that shipped with
your Quad OC-3c/STM-1c POS line card
— The configuration note OC-12c/STM-4c Packet-Over-SONET Line Card
Installation and Configuration (document number 78-4341-02) that shipped with
your OC-12c/STM-4c POS line card
— The configuration note OC-12c/STM-4c Asynchronous Transfer Mode Line Card
Installation and Configuration (document number 78-4344-02) that shipped with
your OC-12c/STM-4c ATM line card
Observing System Startup and Performing a Basic Configuration 4-65
If You Need More Configuration Information