Installing The Power Supply Fan Tray - Cisco Gigabit Switch Router 12008 Installation And Configuration Manual

Removing and Replacing the Fan Trays

Installing the Power Supply Fan Tray

For the following procedure, it is assumed that you have already removed a defective power
supply fan tray and that you intend to replace it with a new one.
To install the new power supply fan tray, perform the following steps.
Step 1
Step 2
Step 3
7-46
Cisco 12008 Gigabit Switch Router Installation and Configuration Guide
Using one hand, grasp the power supply fan tray from above (as shown in
Figure 7-13).
Position the assembly in front of the guide rails in the fan tray bay.
Carefully insert the fan tray into the guide rails in the bay (see Figure 7-13).