Connector Care And Cleaning Precautions - Keysight N5244/45AS Option H85 User's And Service Manual

For continued protection against fire hazard replace line fuse only with same
WARNING
type and rating. The use of other fuses or material is prohibited.
These servicing instructions are for use by qualified personnel only. To avoid
WARNING
electrical shock, do not perform any servicing unless you are qualified to do so.
The opening of covers or removal of parts is likely to expose the user to
WARNING
dangerous voltages. Disconnect the instrument from all voltage sources before
opening.
The detachable power cord is the instrument d isconnecting device. It
WARNING
d isconnects the mains circuits from the mains supply before other parts of the
instrument. The front panel switch is only a stand by switch and is not a LINE
switch (d isconnecting device).

Connector Care and Cleaning Precautions

Remove the power cord to the instrument. To clean the connectors use alcohol in a well
ventilated area. Allow all residual alcohol moisture to evaporate, and fumes to dissipate prior to
energizing the instrument.
To prevent electrical shock, d isconnect the N5244/45AS Option H85 from mains
WARNING
electrical supply before cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
If flammable cleaning materials are used, the material shall not be stored, or left open in
WARNING
the area of the equipment. Adequate ventilation shall be assured to prevent the
combustion of fumes, or vapors.
N5245-90002 User's and Service Guide
N5244/45AS Option H85
Safety and Information
41