Chapter 2 Installation And Wiring; Section 2.1 Compliance To European Union Directives; Emc Directive; Section 2.2 Power Requirements - Spectrum Controls Micro800 2085-IF16C-SC User Manual

Section 2.1
Compliance to
European
Union Directives
Section 2.2
Power
Requirements
WARNING
Chapter 2
Installation and Wiring
This chapter will cover:
• Compliance to European union directives
• Power requirements
• General considerations
• Mounting
• Field wiring connections
This product is approved for installation within the European Union and EEA
regions. It has been designed and tested to meet the following directives.

2.1.1 EMC Directive

This product is tested to meet Council Directive 2014/30/EU Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:
• EN 61000-6-4 Electromagnetic compatibility (EMC)–Part 6-4: Generic
standards–Emission standard for industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC)–Part 6-2: Generic
•
standards–Immunity for industrial environments.
UKCA Electromagnetic Compatibility Regulations 2016
BS EN 61131-2, BS EN 61000-6-4, BS EN 61000-6-2.
•
This product is intended for use in an industrial environment.
The backplane power and the analog inputs of the device shall only be
supplied by an Isolated Secondary Limited Energy Low Voltage source.
The modules receive power through the bus interface from the +5 VDC/+24
VDC system power supply, and a 24 VDC field power supply. Both must be
present for the modules to operate.
User's Manual Pub. 0300322-01 Rev. B