Table of Contents
Advertisement
INSTALL FITTINGS ON THE DUAL TRANSDUCER HYDRAULIC
MANIFOLD
FIGURE 2. Fittings Installed on the Flow Switch
1. Install a -6 ORFS (M) to -6 SAE O-ring (M) straight adapter fitting (P/N 333-0012-084) in Ports A2 and B2 of the
dual transducer hydraulic manifold (P/N 334-003-085).
2. Install the pressure transducers in Ports A1 and B1 of the dual transducer hydraulic manifold.
NOTE:
Depending on the model of the machine, the transducer may need to be installed in Port A3 instead
of Port A1 to avoid interference.
MOUNT THE STEERING VALVE
FIGURE 3. Mounting Bracket Installed
1. Remove the bolts used to secure the machine's radar bracket (beneath the cab).
016-5032-103 Rev. D
HYDRAULIC SYSTEM INSTALLATION
13
Advertisement
Table of Contents
