Maintenance; Overview; Cleaning; Cleaning The Mid Plate Glass Window - Stratasys Origin One User Manual

3d printing system

Hide thumbs Also See for Origin One:

Table of Contents

6 MAINTENANCE

This chapter describes various maintenance tasks that will routinely need to be performed on

the Origin One printer.

Overview

Origin One was designed to reduce the need for frequent maintenance or replacement of

consumables. This section will help you to identify and plan for situations where a printer may

require operator-performed maintenance.

Frequency

Check before every print

Required Tools

Nitrile gloves

Single-use, lint free wipe

Acetone

Procedure

1. Fold a single-use, lint-free wipe (such as a Kimtech wipe).

2. Soak the single-use wipe liberally in acetone.

3. Draw the wipe lightly across the surface of the glass, taking care not to apply any pressure.

4. Dispose of the single-use wipe.

5. Repeat steps 1-4 until the entire glass surface is wiped, ensuring that no smudges or

residue remains.

Warning: Skin contact hazard

Prolonged contact with solvents can cause skin irritation. Do not continue before

putting on protective gloves.

Cleaning the Mid Plate Glass Window

Page 51

Table of Contents