Table of Contents
Advertisement
Safety Instructions
Stratasys makes every effort to ensure that our printers are safe and reliable at all times.
However, there will be times when you must access areas of the printer where potentially high
voltages, hot temperatures, and/or moving mechanical components could cause severe injury.
Warning Symbols
Meaning
Information
Warning
WARNING:
Pinch Point
WARNING:
Burn Hazard
WARNING:
Hazardous
Chemicals
WARNING:
Ultraviolet
Radiation
© Copyright 2022 Stratasys. All rights reserved.
Location
Provides additional
information that is helpful
to properly use the printer.
Exclamation mark: This
icon is used for other
instances and items for
which a standard symbol
does not exist.
This icon identifies
instances where moving
parts of the machine
create a hazard for hands
and fingers while the
machine is in operation.
Surface temperature of
metal components may
exceed 60C (140F). Use
appropriate precautions to
avoid burns.
The photocured resins
inside the machine must
be handled with the
appropriate precautions, in
accordance with the SDS
of the resin.
This icon identifies
instances where damaging
levels of ultraviolet
radiation may be present.
Personnel should be
required to wear eye
protection with UV certified
lenses while the machine
is in operation.
Product Safety Signs
Comments
Page 3
Advertisement
Table of Contents
Troubleshooting
