Stratasys Origin One User Manual page 67

Tray Maintenance
7. Use acetone to remove resin from the tray threads. Remove any remaining residue from
the tray threads with compressed air or paper towels.
8. Remove any remaining resin from gaskets using paper towels and IPA. If needed, sonicate
the gaskets in an IPA bath.
Figure 9: Clean tray components
Sonicate gaskets in an IPA bath for no more than 30 seconds per cleaning.
Do not use acetone to clean the tray bottom. Damage to the O-rings will result.
© Copyright 2022 Stratasys. All rights reserved.
Replacing Tray Sheets
Page 60