Table of Contents
Advertisement
Tray Maintenance
12. Insert the second gasket over the tray sheet. Confirm that all the pins are inserted through
the gasket holes and that the gasket is laying flat over the tray sheet surface.
13. Place the tray bottom onto the sheet and press down gently.
Caution
Thumbscrew must be removed before tightening the tray bolts to prevent interference
between the thumbscrew and the tray bottom.
© Copyright 2022 Stratasys. All rights reserved.
Figure 13: Second gasket
Replacing Tray Sheets
Page 63
Advertisement
Table of Contents
Troubleshooting
