Printing; Network Configuration; Overview - Stratasys Origin One User Manual

3d printing system

Hide thumbs Also See for Origin One:

Table of Contents

Printing

Overview

Origin printers establish TLS secured connections via a VPN tunnel to the Origin Cloud, which

is deployed within Google Cloud Platform.

Each Origin printer creates and operates an internal VPN gateway, and connects to a single

Stratasys-operated VPN gateway in Google Cloud Platform over UDP. No additional VPN

appliance or customer-managed gateway is necessary.

Stratasys strongly recommends connecting printers to the Origin cloud platform via VPN

because it is secure and robust, simple to configure, and has zero maintenance overhead.

With this method, all communication is protected by an additional layer of end-to-end

encryption and authentication.

VPNs are the preferred networking solution by every major cloud provider for interconnection

between on-premise and cloud networks (see documentation from Amazon, Google, Microsoft,

and IBM).

Figure 7: Print Status Display - Printing

This section should be forwarded to your appropriate IT personnel ahead of

installation for appropriate review as well as proper firewall configuration. Once your

network and firewall are appropriately configured, contact your Stratasys

representative to review and confirm the configuration.

Network Configuration

Page 21

Table of Contents