Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 90

MODEL 15XP/1390
The bump bar should protrude approximately
1-1/4" (32 mm) from the infeed tray.
If these measurements are not within specifi cations, the bump bar needs to be
checked for worn, loose, damaged, or broken parts. Repair or replace parts as
needed and/or contact the nearest dealer or Bandit Industries for assistance.
Copyright 9/18
HYDRAULIC BUMP BAR
74
MAINTENANCE
Using a belt tension gauge, the bump
bar should activate with approximately
25-30 lbs (11-14 kg).
Bandit