Autofeed Options - Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual

MODEL 15XP/1390
Consult the original manufacturer's manual for your chippers
When processing material through the chipper, the feed system will automatically stop when the engine
drops below a preset RPM point. The engine is constantly being monitored by an adjustable electronic speed
switch. The switch can be adjusted so that at a given RPM, an electronic relay system will operate the hydraulic
solenoid valves to stop the feedwheels until the engine has recovered speed. The patented "Autofeed Plus"
system will reverse the feedwheels for a set period of time and then stop until the engine has recovered
speed. Both autofeed systems will then automatically turn the feed on to resume forward travel.
Due to required components and equipment options a machine may have various types or brands of
autofeed systems. Each chipper is shipped with the original manufacturer's manual for the autofeed system
it is equipped with.
For the approximate autofeed settings on all optional autofeed systems refer to page 28 of the chipper
manual. For part numbers on the hydraulic portion of the autofeed systems refer to pages 116 - 117 of the
chipper manual. Refer to the Bandit Controls manual for more information.
Do not power wash the digital tach hour meters. Pressure causes unwarranted damage. Do not spray
tach, this will void warranty.
PART NUMBERS FOR AUTOFEED DIGITAL TACH HOUR METERS
IEC (formerly ESI Intelli-Feed)
Part Number: 900-2908-11
For Service Call: 1-815-985-0383
L.O.R. MFG.
Part Number: 900-2906-82L
For Service Call: 1-866-644-8622
Copyright 9/18

AUTOFEED OPTIONS

AUTOFEED SYSTEM
Autofeed operating and maintenance procedures
BANDIT CONTROLS
25
AUTOFEED OPTIONS
Bandit