Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 12

DANGER
!
SAFETY CLOTHING AND APPAREL
It is essential that a chipper operator wears proper gloves, clothing, hard hat, face shield, hearing protection,
safety glasses, etc. when operating a chipper. Don't wear gauntlet type gloves or loose improper clothing.
Avoid wearing necklaces, rings, watches, and neckties while operating the equipment.
Follow the established "ANSI" and "OSHA" standards.
DANGER
!
REFLECTIVE STRIPED TAPE ON
FEED CONTROL HANDLE
We began installing striped reflective tape on the feed control handle of our hand fed chippers. This tape
is reflective, self adhesive, and has contrasting colors. The tape helps make the feed control bar stand out
more and it makes the rear of the chipper more visible to a vehicle behind you while transporting the chipper.
Striped tape can be obtained through your local Bandit® dealer. The striped tape can be ordered by the foot
under part number 900-9901-69.
Safety Booklet
REFLECTIVE STRIPED TAPE ON
FEED CONTROL HANDLE
STRIPED
REFLECTIVE
TAPE
CONTROL
BAR
ix
SAFETY CLOTHING AND APPAREL
Bandit Industries, Inc.