Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 83

MODEL 15XP/1390
FIGURE 1
CHECK SHEAVE
ALIGNMENT WITH
STRAIGHT EDGE
OR STRING
ENGINE
SHEAVE
CLUTCH END
FIGURE 2
Worn or misaligned belts and sheaves in the power train
causes belt slippage, thus power loss. Keep the power
train working for you, not against you, by checking for
needed adjustment or replacement.
GOOD BELT WORN SHEAVE
BELT BELT
SPACE
SHEAVE
Copyright 9/18
BELT TENSION
CHIPPER
SHEAVE
OF ENGINE
ENGINE
MOUNTING
BOLT
ENGINE
ADJUSTER
WORN BELT
BELT
SHEAVE SHEAVE
ENGINE MOUNTING
BOLTS
POSITIONING
JAM NUTS
POSITIONING
JAM NUTS
Main Drive Belts: 3/8" (9.5 mm) deflection with
60 - 64 lbs (27.2 - 29.0 kg) of force for machines up to 150 Hp; or
3/8" (9.5 mm) deflection with 48 ‑ 51 lbs. (21.8 ‑ 23.1 kg) of force
for machines with 150 Hp or above.
Pump Drive Belts: 1/4" (6.4 mm) deflection
67
MAINTENANCE
RADIATOR
END OF
ENGINE
ENGINE
MOUNTING
BOLT
BELT TENSION GAUGES
SINGLE BARREL GAUGE
(UP TO 30 lbs.) 900-1919-23
DOUBLE BARREL GAUGE
(UP TO 66 lbs.) 900-1917-02
TRIPLE BARREL GAUGE
(UP TO 90 lbs.) 900-1919-67
FIVE BARREL GAUGE
(UP TO 165 lbs.) 900-1919-66
with 12 lbs (5.4 kg) of force.
YES NO
YES NO
YES NO
Bandit