Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 162

BANDIT CONTROLS
Maint Pages
MAINT2 OUTPUTS
Shows the status of Controller1 (C1) outputs that are able to be diagnosed.
Observe the note on the screen that output wiring can only be diagnosed for open/broken connection while
the output is de-engergized.
The Outputs in Controller1 (C1) are organized into 2 groups, each group has a supply fuse. The status of each
fuse is shown at the top of each group. If multiple outputs from the same group have bad (0) status, check the
supply fuse for that group as well as the individual wires to each coil.
245774458290 21Dec2016
Press the Maint4 button to navigate
to Maintenance 4.
6