Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 48

MODEL 15XP/1390
CORRECT OPERATION OF FEED CONTROL BAR
FOR ALL CHIPPERS DESIGNED TO BE
"HAND FED".
IF YOU ARE IN THE AREA OF THE
I N F E E D H O P P E R , A LWAY S B E
PREPARED TO OPERATE AND WITHIN
EASY REACH OF THE FEED CONTROL
BAR.
ADJUSTING TENSION FOR CONTROL BAR PIVOT
NORMAL WEAR REQUIRES PERIODICAL
ADJUSTMENT OF PIVOT TENSION.
FEED CONTROL BAR SHOULD PIVOT WITH
LITTLE EFFORT, BY HAND OR WITH A PULL ON
"LAST CHANCE" CABLES. LUBRICATE PIVOT
POINTS OF FEED CONTROL BAR WEEKLY.
ADJUST PIVOT TENSION WITH
THE TIGHTNESS OF INSIDE
FRICTION NUTS.
SECURE ADJUSTMENT WITH
OUTSIDE JAM NUTS.
Copyright 9/18
CONTROLS
FEEDING
AND LAST CHANCE CABLE PULL
OFF
USE THE 1" JAM NUT TO ADJUST
C ONTROL BAR PIVOT TENSION.
32
CONTROLS
PUSH TO
REVERSE
FEEDING
Bandit