Bandit INTIMIDATOR 15XP/1390 Operating & Parts Manual page 44

NOTICE
Chippers are not designed to cut chunk wood,
dimensional lumber including rail road ties, or end
cut logs standing on end. Chipper knives coming in
contact with a flat surface puts an extreme shock
load on the chipper drum or disc components and
bearings. This can cause damage to the machine
that will not be covered under warranty.
1. Stop feeding material.
2. Allow the machine to clear out any remaining
material.
3. Make sure the top feedwheel is in the lowered
position.
4. Throttle the machine down.
5. Disengage the clutch.
6. Wait for the chipper drum or disc to come to a
complete stop.
Copyright 12/20
MACHINE OPERATION
SHUT DOWN
INSERT
7. Shut the engine off.
8. Remove the key, and make sure it stays in your
possession.
9. Allow the machine to cool down
10. Remove all debris, wood chips, sawdust, leaves,
etc. from the machine.
11. If transporting the machine, follow the transport
procedures.
OPERATION
Bandit