Focusing The Camera - Cisco 3000 Use & Care Manual

Chapter 9 First-Time Setup

Focusing the Camera

To focus the cameras using the large and small targets, complete the following steps:
Place the small target on center of the table, in front of the center camera.
Step 1
Arrange the large target five feet (152 cm) behind the small target.
Step 2
Use a chair to prop up the large target.
Tip
Figure 9-8 Arranging the Small and Large Targets
In the Cisco TelePresence Administrative GUI, click Setup, then click Show Focus Target.
Step 3
Adjust the small target so that the red box encloses the upper patterns on the large target and the green
Step 4
box encloses the patterns on the small target.
Figure 9-9 Positioning the Small and Large Targets
Large
target
Small
target
Red and green
horizontal bars
OL-14521-01
5 ft
Large target
10 ft
Small target
Cisco TelePresence System 3000
Setting Up CTS Components
Red
rectangle
Green
rectangle
9-13