Cisco 3000 Use & Care Manual page 73

Chapter 5 Building the Display Shelf Assembly
Step 5 Attach the screen supports to the accessory cabinets and position, but do not attach, the cabinets to the
left and right attachment brackets
These screen supports are only required if you use a Type 1 projector screen, part number 800-28681-xx.
If your installation uses the projector screen with a product ID of CTS3K-SCREEN and a part number
of 74-5416-xx, do not install these brackets.
Figure 5-6 Accessory Cabinet
12
Note
Note
OL-14521-01
2
3
4
One wall of the left Accessory cabinet was removed from this illustration for clarity.
Before you attach the Accessory cabinets to the brackets, use them as supports while assembling
the table segments in Chapter 6, "Building the Table Assembly."
Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE
1
4
3
12
Cisco TelePresence System 3000
5-9