Mounting And Leveling The Plasma Displays; Parts List - Cisco 3000 Use & Care Manual

Mounting and Leveling the Plasma Displays

Revised: September 16, 2009, OL-14521-01

Parts List

Key Part Description
1 65-inch high-definition display
2
Black buffer strips
3
Display shelves
4 M8 x 20 mm screws
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
The directions left and right refer to the assembly as you face the Plasma displays.
Note
Figure 3-3
Note
review all of Chapter 3 before beginning the leveling process.
OL-14521-01
Part Number
74-4881-03
700-23981-xx
700-23600-xx,
700-23599-xx,
700-23598-xx
(CTS3K-FUR-
MAPLE)
700-23339-xx,
700-23340-xx,
700-23341-xx
(CTS3K-M-TABL
E-G2)
48-2273-xx
through Figure 3-8 illustrate the process of leveling the Plasma displays. You may want to
C H A P T E R
Qty Ctn
3 20, 21, 22
2 1
3 45 (CTS3K-FUR-
MAPLE)
44
(CTS3K-M-TABL
E-G2)
1
Cisco TelePresence System 3000
3
Notes
The Display shelves are used in
this chapter for leveling purposes
only. The Display shelves and the
attaching bracketing hardware are
described in Chapter 5, Building
the Display Shelf Assembly.
3-1