Cisco 3000 Use & Care Manual page 26

Chapter 2 Building the Display Assembly
Parts List
Step 9 Position the three Display structures relative to the rear wall.
Using the measurements provided in Figure 2-9, there will be approximately 3 inches (8 cm) of space
Note
between the light reflector and the wall. These minimum dimensions can make installation of the light
reflector difficult. If your room size and room lighting pattern allow extra space, add extra space to these
minimum measurements.
Figure 2-9 Positioning the Display Structures
Minimum 24 inches Minimum 12 inches (30.5 cm) Minimum 24 inches
(70 cm) (70 cm)
Cisco TelePresence System 3000
2-10
OL-14521-01