View Camera Settings (Local Camera) - Cisco TelePresence CE9.13 User Manual

Camera Control

View Camera Settings (Local camera)

1
In a call or outside a call (as shown here), move cursor up to
the upper right corner to the Camera icon. Press OK on the
remote control.
3
Adjust the pan, zoom, and tilt of the camera. Use the Increase/
Decrease controls of the remote control to adjust the zoom and
the Cursor keys to adjust pan and tilt.
D15097.23 Cisco TelePresence SX10, SX20 User Guide JUNE 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
The camera icon appears. Press OK again on the remote
control.
4
You can make the self-view image sticky (always shown) and/or
maximize it by selecting the icons in the upper right corner of this
menu.
Press Back on the remote control to exit the menu.
About Camera Settings
The camera settings let you control
the zoom, pan, and tilt of your own
camera.
The self-view (the image that the
others see from your device) can
be turned on and off as well as be
shown minimized or maximized (full
screen).
You may want the self-view to be
always shown, this is called to make
it sticky.
32