Leveling Goals - Cisco 3000 Use & Care Manual

Chapter 3 Mounting and Leveling the Plasma Displays
Purpose of Leveling the Plasma displays

Leveling Goals

Leveling the Display shelves and the Plasma displays, and aligning the seams of the Display shelves with
the edges of the Plasma displays insures that images displayed from the remote conference room match
the local conference room configuration.
The leveling goals illustrated in Figure 3-4 through Figure 3-8 show how to use the leveling alignment
points in Figure 3-3. You may need to perform any or all of the illustrated goals several times while
aligning and leveling the Plasma displays.
Use the four Leveling feet on each Display structure to level the Display shelves along the X and Y axes.
Step 4
Leveling the Display shelves insures the Display structures are level. The Display structures should be
level before attempting to level the Plasma displays.
Figure 3-4 Level the Display shelves along the X and Y axes
Cisco TelePresence System 3000
3-6
OL-14521-01