Cisco 3000 Use & Care Manual page 98

Building the Table Assembly, Product ID CTS3K-M-TABLE-G2
Step 3 Assemble the I/O modules for the outside left and outside right molded foam bumpers.
The outside left and outside right molded foam bumpers only have one I/O module each. The inner
molded foam bumpers have two (see
Steps for routing the Ethernet and power cables are in
Note
The flange on the I/O module cover plate is wider on the bottom than on the top.
Note
Figure 6-16
18
19
Cisco TelePresence System 3000
6-20
Foam Bumper Assembly
21
25
20
Figure 6-17).
Chapter 8, "Routing Power and Signal Cables."
22 23 24
Chapter 6 Building the Table Assembly
OL-14521-01