Cisco 3000 Use & Care Manual page 29

Chapter 3 Mounting and Leveling the Plasma Displays
Hang the left, center, and right Plasma displays on the Display structure crossbars
Step 1
Caution
Figure 3-1
Caution The edges of the Plasma displays are sharp and uncomfortable to lift with bare hands. Nonslip gloves
are recommended.
Do not lift the display without appropriate back support, foot protection (such as steel-toed shoes), and
Caution
room to lift the display using your legs and not your back.
The displays are heavy and may cause injury or damage if care is not taken to support them properly
Warning
while mounting. Use caution and additional assistance as needed.
OL-14521-01
Make sure the Plasma display Leveling feet remain firmly seated on top of the Display shelf
supports.
The left, center, and right Plasma displays
Cisco TelePresence System 3000
Parts List
3-3