Assembly Overview - Cisco 3000 Use & Care Manual

Chapter 1 Overview
Figure 1-1 View of an Assembled Cisco TelePresence System 3000

Assembly Overview

Perform the following steps to install a CTS 3000:
Step 1 Build the display assembly. See
Step 2 Mount and level the plasma displays. See
more information.
Step 3 Build the lighting assembly. See
Step 4 Build the display shelf assembly. See
information.
Step 5 Build the table assembly, excepting the privacy panels, by completing the following steps:
a.
b.
OL-14521-01
Install the table. See Chapter 6, "Building the Table Assembly"
Install and connect the microphones. See
install the microphones and
microphones.
Chapter 2, "Building the Display Assembly"
Chapter 3, "Mounting and Leveling the Plasma Displays"
Chapter 4, "Building the Lighting Assembly"
Chapter 5, "Building the Display Shelf Assembly"
Step 13 in Chapter 6, "Building the Table Assembly"
Step 8 in Chapter 8, "Routing Power and Signal Cables"
Assembly Overview
for more information.
for more information.
for more
for more information.
to connect the
Cisco TelePresence System 3000
for
to
1-3