Cisco 3000 Use & Care Manual page 18

Parts List
Key Part Description
10
Support crossbars
11 M8 x 70 mm screws
12 M8 washers
13
M8 x 20 mm screws
Caution The display structures are unstable during assembly. Use caution, and support all structures as required.
Some system components have metal and plastic edges with hard angles. These edges are exposed until
Caution
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
The directions left and right refer to the assembly as you face the Plasma displays.
Note
Attach the Leveling feet to the Rear and Front Foot stabilizers.
Step 1
Figure 2-1
The structure becomes heavier and more difficult to move during the building process.
Note
the correct positioning of the display structure; keep this in mind as you build the structure.
Cisco TelePresence System 3000
2-2
Part Number Qty
700-23361-xx 4
48-2274-xx
49-1165-xx
48-2273-xx
Leveling feet
3
4
Chapter 2
Ctn Notes
33 (CTS3K-FUR-
MAPLE)
30
(CTS3K-M-TABLE-
G2)
1
1
1
2
Building the Display Assembly
Figure 2-9 shows
OL-14521-01