Cisco 3000 Use & Care Manual page 86

Building the Table Assembly, Product ID CTS3K-FUR-MAPLE
Step 4 Attach the right Table segment.
a.
b.
c.
d.
Figure 6-4 Right Table segment
15
9
Cisco TelePresence System 3000
6-8
Cam Lock rods have two adjustable halves that screw into a center piece. Make sure you screw the
two halves of the Cam Lock rod equally into the center piece, so both halves are of equal length
when inserted into the Cam Lock in each Table segment.
While a cam lock coupling is being tightened, hold the table edges together to avoid damage to the
cam lock or the table segment.
Use an Allen wrench to tighten the cam lock coupling so the two table segments are connected
snugly.
While one person is tightening the cam lock couplings from below, it is important for the support
person to maintain the alignment of the table segment edges.
5
15
9
10
10
13
17
4
Chapter 6 Building the Table Assembly
OL-14521-01