3.7.1
INTELLIGENT ANALYSIS NOTIFICATION
You can set the Notifications for each Intelligent Analysis Event (PID, LCD, SOD, PD, FD, CC, Sound Detection,
Occlusion Detection).
Here follow a short Notification description:
Channel: this is used to select the channel with which the Intelligent detection function is associated.
•
Buzzer: you can set if the buzzer will sound and how long when Intelligent event is detected (Disable, 10sec, 20sec,
•
40sec, 60sec).
Alarm Out: allow to match the correct external alarm sensor number.
•
Latch time: you can set how long the external sensor alarm will last when Intelligent Event is detected (10sec, 20sec,
•
40sec, and 60sec).
Record Channel: this is used to select the channels to be recorded following the intelligent event detected by the
•
HVR from the list shown.
Post Recording: you can set how long alarm record will last when alarm ends (10sec, 30sec, 1min, 2min, 5min).
•
Show Message: You can set show the icon on the screen when Intelligent alarm is detected. About icons type please
•
refer to section "3.2 - Live Interface and Pop-up Menu".
DS1097-010
53