Utc Control; Cruise Set - urmet domus 5M-Lite HVR Series User Manual/Instructions

11
12 Total
13 No./Time
13
13
13
14
15 Preset List
3.2.4.1

UTC Control

The UTC function (Up the Coax) allows the data transmission on the same coax cable used for video signals transmission.
It is not needed the RS-485 serial connection in order to remote control the camera unit, you can open the OSD menu of
the camera and control the menu using the PTZ control buttons.
According to different camera Iris [+] or [central enter] buttons open the On Screen Display menu. The arrows buttons
allow to select and to choose the different menu functions.
According to the type of camera, the OSD is displayed by the management of iris buttons or by pressing the central enter
button, using the arrows buttons you navigate the menu.
The last choice of the menu allows to save and exit from menu.
IMPORTANT NOTE:
The UTC function can be used according to the AHD camera model. To see which camera model to associate
with the UTC function, see the specific documentation of the camera model available on the Urmet website.
3.2.5

CRUISE SET

Open auto cruise function on PTZ setting menu if you want to setup cruise function (system default: off), and set up cruise
channel, cur point and total quantity and stop time etc
How to set pre-set point
Total: set up pre-set point quantity
•
Cur Point: indicates starting point cruised. System default point is 01. The model support up to 255 pre-set points.
•
Time: sets the stop time at each point
•
CALL: allow you go to a specific preset point.
•
SET: allow you set a set of specific preset points of a PTZ camera.
•
Note:
Use 95 to enter the OSD menu of the Speedome. Run the SET95 control if CALL95 does not work. See the
Speedome manual for the Speedome OSD.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction;
3. Click [Set] to set the point as preset point;
4. Click [Save] to save the preset point;
5. Follow the above step to add one more preset point.
Save: save all the preset points
•
Clear: allow you delete one selected preset point.
•
Note: Up to 254 pre-sets per one camera can be stored. However, actual preset quantity differs depending on PTZ
performance.
DS1097-010
Pointer A) Click
Panel
B) Click up/down/left/right to move and set preset points
Total Display the total number of preset points
Number of preset point; Set the time how long the camera will stay in the
No./Time
preset point
Enter the number of a specific preset point, click this button to move your
Set
PTZ camera to the preset point
Delete Click to delete the selected preset point
Click to set a specific preset point on a PTZ camera.
Go to
You can add up to 255 preset points for the HVR.
Click
Start /Save
points
Preset List Preset List
21
to Start/Stop Preset to cursor
,than Click to save the settings and preset