Analog Channels; Ip Channels - urmet domus 5M-Lite HVR Series User Manual/Instructions

3.5.1.1

Analog Channels

Use this menu page to enable/exclude the available analogue channels. The various cameras supported on all analogue
channels are: Camera AHD 4K, Camera AHD 5M, Camera AHD 4M, Camera AHD 1080P, Camera AHD 720P and
Camera 960H.
The list of available analogue channels with the respective state is shown in the central part: Enable, Disable. Check the
corresponding box to change the state of a single channel; click on the "Analog Channels" box to do the operation on all
available channels. Press the "Save" button to confirm the changes made.
Warning: the system must be rebooted to enable or exclude one or more analogue channels.
NOTE: For each disabled analogue channel and for each added IP channel, the bandwidth will be
increased by additional 4Mbps for 5M Lite HVR Series and 8Mbps for 4K HVR Series.
3.5.1.2

IP Channels

The IP cameras are configured by selecting IP Channels on the side menu. The four buttons on the lower part of the page
can be used to add or eliminate cameras in the system.
Click [Search] to search IP cameras from local network. Press
(the IP address is assigned automatically is this case); Click on [Add] or
list of available channels.
In all cases, you will need to enter the camera access password (admin for default settings) and then confirm the
operation.
DS1097-010
[Add All] to quickly add IP cameras present in the HVR LAN
to manually add a camera to the system of the
28