Mouse Operation; Camera And Monitor Connection; Power Supply Connection - urmet domus 5M-Lite HVR Series User Manual/Instructions

2.4

MOUSE OPERATION

The mouse can be used to operate the system in addition to the remote control. The following table shows the possible
actions which may differ according to the state and the current system screen.
ACTION MODE
Live display
Right click
Main Menu or
submenu
Logout
Login
Main Menu
Left click
Submenu
Right click
Double click
Move the
mouse
Drag the
mouse
2.5

CAMERA AND MONITOR CONNECTION

Connect camera cable to video input of HVR, and from video output of HVR to Monitor via VGA/HDMI connector (Refer to
section 2.2- ; or if the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of
Rear Panel
HVR respectively.
2.6

POWER SUPPLY CONNECTION

Please only use the power adapter supplied with the HVR.
After power on please make sure the video I/O connection well, audio device with RCA cable.
DS1097-010
This activates the Main Menu (pop-up menu) on the lower part of the screen
This closes the current menu and go back to the previous page
Click on any item of the pop-up menu in the low part of the screen to open a login
window where to enter access credentials
Click on any item of the pop-up menu to directly access the required submenu
Click to access the items of the various submenus; in [Detailed file] play a previously
recorded file.
Change the check box state and the motion detection area.
Click on the combo box
when active.
On the colour control bar and on the volume control bar click to adjust the respective
values.
Click on the combo box
Click to select the values in the specific combo boxes. This activates the drop-down
menu for support to enter Chinese characters, special symbols, numbers and letters
to be used instead of [Enter-
]
In live mode, right-click to view the pop-up menu.
In main menu or submenu mode, right-click to close the current menu.
In live or playback mode, to view the image in full-screen mode, repeat to go to the
previous view.
This selects the menu item
In motion detection mode, drag the mouse to select the motion detection area; in
[Color set] mode, drag the mouse to adjust the colour and volume bar.
14
FUNCTION
to open the drop-down menu; left-click to stop timed view
to access the drop-down menu.
] or [Backspace