Io Sensor Alarm Notification - urmet domus 5M-Lite HVR Series User Manual/Instructions

3.7.3

IO SENSOR ALARM NOTIFICATION

For this Menu page please read the description under the following pictures: Now you can perform alarm set based on
different status.
Here follow a short Notification description:
Alarm In: allow you select one desired Alarm No.
•
Alarm Type: allows you select the three options – NO (Normal Open), NC (Normal Close) and OFF. Set to "Normal
•
Open", I/O status Alarm will be activated while sensor is ON; set to "Normal Close", I/O status alarm will be activated
while sensor is OFF; set to "OFF", I/O status alarm will not be triggered.
Buzzer: you can set how long the buzzer will sound when sensor alarm is detected (OFF, 10sec, 20sec, 40sec,
•
60sec);
Alarm Out: allow to match the correct external alarm sensor number.
•
Latch Time: you can set how long the external sensor alarm will last when sensor alarm is detected (10sec, 20sec,
•
40sec, and 60sec);
Channel: to allow to match the channel to IO alarm. The channel will be activated when the alarm is detected.
•
Post Recording: you can set how long alarm record will last when alarm ends (10sec, 30sec, 1min, 2min, 5min).
•
Show Message: You can set show the icon on the screen when sensor alarm is detected. About icons type please
•
refer to section "3.2 - Live Interface and Pop-up Menu".
Send Email: Allows you set the alarm images is issued to a specified email (for more information, see section "3.8.3 -
•
Email").
Full screen: you can set if the video is displayed in full screen mode when Alarm Event is detected.
•
FTP Picture Upload: send the picture to FTP Server for IO Alarm Event
•
FTP Video to Upload: send the video to FTP Server for IO alarm Event
•
Picture to Cloud: send the picture to Cloud Server for IO Alarm Event
•
Video to Cloud: send the video to Cloud Server for IO Alarm Event
•
Copy: allow you copy current IO parameters to any other IOs.
•
Default: allow to restore the Default notification settings.
•
Alarm Type
When an object moves into motion/PIR detection area, alarm will be triggered. You can adjust
Motion/ PIR
sensitivity level to suit the needs of your actual application environment.
IO Alarm System can convert alarm signal triggered by external sensor into signal identified by system.
DS1097-010
Function
52