Table of Contents
Advertisement
3.7.2
PIR NOTIFICATION
This is an optional function, it will appear if Camera supports sensor PIR, you connect external sensor PIR alarm devices
to work with the PIR. Select PIR in the side menu to open a page where to define the methods and actions to be taken in
case of PIR alarm detection.
Here follow a short Notification description:
Channel: this is used to select the channel with which the PIR detection function is associated.
•
Buzzer: you can set if the buzzer will sound and how long when PIR is detected (Disable, 10sec, 20sec, 40sec,
•
60sec);
Alarm Out: allow to match the correct external alarm sensor number.
•
Latch time: you can set how long the external sensor alarm will last when PIR is detected (10sec, 20sec, 40sec, and
•
60sec);
Record Channel: this is used to select the channels to be recorded following the PIR detected by the HVR from the
•
list shown.
Post Recording: you can set how long alarm record will last when PIR alarm ends (10sec, 30sec, 1min, 2min, 5min).
•
Show Message: You can set show the icon on the screen when PIR alarm is detected. About icons type please refer
•
to section "3.2 - Live Interface and Pop-up Menu"
Send Email: this is used to send the alarm images to the configured email addresses (for more information, see
•
section "3.8.3 - Email").
Full screen: you can set if the video is displayed in full screen mode when PIR Event is detected
•
FTP Picture Upload: send the picture to FTP Server for PIR Event
•
FTP Video to Upload: send the video to FTP Server for PIR Event
•
Picture to Cloud: send the picture to Cloud Server for PIR Event
•
Video to Cloud: send the video to Cloud Server for PIR Event
•
Copy: allow you copy current channel parameters to any other channel or all channels.
•
Default: allow to restore the Default notification settings.
•
DS1097-010
51
Advertisement
Table of Contents
