Table of Contents
Advertisement
SENSOR/ALARM FUNCTIONS
➢
Alarm input: Connect signal [-] of the sensor to pin G (GND) and the signal [+] to the input of channel 1...16 as
alarm device.
➢
Alarm output: Connect to the two ports marked with "ALARM OUT"
2.3
OPERATION WITH MOUSE
The mouse must be used to operate the system.
TYPE
Left click
Right click
Double left-click
Move the mouse
Drag the mouse
2.4
IP CAMERA AND MONITOR CONNECTION
Connect the IP cameras to the NVR using the network connections and connect the VGA port and/or the HDMI output port
to the monitor (see paragraph 2.2 Rear panel).
2.5
POWER CONNECTION
Use the power supply unit provided with the NVR only.
After switching on, check that the video output connections are correct and that the audio device is connected via the RCA
cable.
DS1098-038C
In locked menu mode, open the pop-up menu and click on any submenu to open the
login window; in unlocked menu mode, open the pop-up menu and left-click to open any
submenu directly.
After having opened the main menu, left-click to open any submenu; in [Detailed file]
mode, left-click to play the recording file.
Change the check box state and the motion detection area.
Click on the combo box to open the drop-down menu; left-click to stop timed view when
active.
Left-click to adjust the colour control bar and the volume control bar.
Click on the combo box to access the drop-down menu.
Left-click to select the values in the specific boxes. This activates the drop-down menu
for support to enter Chinese characters, special symbols, numbers and letters to be used
instead of [Enter-
] or [Backspace
]
In live mode, right-click to view the pop-up menu.
In main menu or submenu mode, right-click to close the current menu.
In live or playback mode, double-click to display the image in full screen mode.
This selects the menu item
In motion detection mode, drag the mouse to select the motion detection area; in [Color
set] mode, drag the mouse to adjust the colour and volume bar.
Function
13
Advertisement
Table of Contents
