Fit Battery Cover Onto Bosch Powertube 625 Battery (Horizontal) - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

5.3.2.2 Fit battery cover onto Bosch PowerTube 625 battery (horizontal)

Only applies to pedelecs with this equipment
1 Detach upper interface (lock side) from the
BOSCH PowerTube 625 battery with a
TORX® T20 wrench.
Figure 57: Detaching the upper interface
2 Screw the battery mounting plate to the
BOSCH PowerTube 625 battery with original
BOSCH screws (M4 × 8 T20). In doing so,
ensure that the removal tab faces the front of
the battery.
Figure 58: Fitting the mounting plate
3 Press to push the battery cover onto the
battery. In doing so, ensure that the battery
On-Off button fits through its designated slot in
the cover.
 The battery cover will lock into the fitting
grooves on the battery.
MY22Z01 - 12_1.0_25.07.2022
Figure 59: Pushing the battery cover onto battery
 Insert battery into the frame.
Assembly
71