Using The Push Assist System; Using The Riding Light; Selecting The Level Of Assistance; Journey Information - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

6.18.4 Using the push assist system

CAUTION
!
Injury from pedals or wheels
The pedals and the drive wheel turn when the
push assist system is used. There is a risk of
injury if the wheels are not in contact with the
ground when the push assist system is used (e.g.
when carrying the pedelec up stairs or when
loading it on a bicycle rack).
 Only use the push assist mode when pushing
the pedelec.
 You must steer the pedelec securely with both
hands when using push assist.
 Allow for enough freedom of movement for the
pedals
The push assist system helps with pushing the
pedelec. The speed can be a maximum of 6 km/h
in this case.

The tractive power of the push assist and its
speed can be influenced by the selection of gear.
We recommend using first gear for cycling uphill
to protect the drive.

The level of assistance O F F must not be
selected.
1 Press the push assist button briefly.
2 Press and hold the plus button within
3 seconds to switch on the push assist.
3 Release the plus button to shut off the push
assist. The push assist system switches off
automatically as soon as the wheels are
blocked or the speed exceeds 6 km/h.
MY22Z01 - 12_1.0_25.07.2022

6.18.5 Using the riding light


The drive system needs to be already switched
on to turn on the riding light.
 Press the riding light button.
 The riding light is switched on (riding light
symbol is displayed) or switched off (riding
light symbol is not displayed).

6.18.6 Selecting the level of assistance

 Press the plus button to increase the level of
assistance.
 Press the minus button to reduce the level of
assistance.

6.18.7 Journey information

The displayed journey information can be
changed and partially reset.
If the on-board computer is removed from its
mount, all function values are saved and can still
be displayed.
6.18.7.1 Switching the displayed journey
information
 Press the on-board computer info button or
the operating element info button repeatedly
until the required journey information is
displayed.

6.18.7.2 Resetting the journey information

 If you wish to reset the journey information Trip
Distance, Trip Time and Avg. Speed, switch to
one of these three functions. Press the RESET
button until the indicator is set to zero. This will
also reset the readings for the other two
functions.
 If you wish to reset the Max. speed journey
information, switch to this function. Press the
RESET button until the indicator is set to zero.
 If you wish to reset the Range journey
information, switch to this function. Press the
RESET button until the indicator is the factory
setting value.
Operation
136