Operation; Before Initial Commissioning; Switching The On-Board Computer On/Off; Battery Charge Indicator - Bosch Kiox Original Operating Instructions

English – 12

Operation

Before initial commissioning

The Kiox is supplied with a partially charged battery. Before using it for the
first time, this battery must be charged for at least one hour via the USB port
(see "Energy supply of the on-board computer", page English – 15) or via
the eBike system.
The control unit should be attached such that the buttons are almost per-
pendicular to the handlebars.
When turning on the on-board computer for the first time, the language se-
lection is displayed and then you can use the menu item <Intro to (Intro-
duction to) [name of BUI]> to find out more about the main functions and
displays. You can access this menu item again at a later time via <Set-
tings> → <Information>.

Switching the on-board computer on/off

To switch the on-board computer on and off, briefly press the on/off button
(4).

Battery charge indicator

The battery charge indicator of the eBike battery d can be read on the status
page and the status bar. The eBike battery's state of charge is also indicated
by the LEDs on the eBike battery itself.
Colour of the in-
dicator d
White
Yellow
Red
If the eBike battery is being charged on the wheel, a corresponding notifica-
tion will be displayed.
1 270 U20 Ken | (13.11.2018)
Explanation
The eBike battery is over 20% charged.
The eBike battery is over 5% charged.
The capacity for assisting the drive has been used up,
and assistance is switched off. The remaining capacity
will be provided for the bike lights and the on-board
computer. The remaining capacity of the eBike battery
is enough for about 2 hours of lighting. This does not ac-
count for other consumers (e.g. eShift gear changing,
charging external devices using the USB port) which
could reduce the duration.
Bosch eBike Systems