Using The On-Board Computer; Using The Usb Port; Switching On The On-Board Computer; Switching Off The On-Board Computer - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

Pedelecs with intuvia on-boad computer
Hide thumbs Also See for ZEMO SU-E FS 12:
Table of Contents

Advertisement

6.18

Using the on-board computer

CAUTION
!
Crash caused by distraction
A lack of concentration while riding increases the
risk of an accident. This may cause a crash with
serious injuries.
 Never allow yourself to be distracted by the
on-board computer.
 Stop pedelec if you want to make inputs on the
on-board computer other than change the
level of assistance. Only enter data when the
bicycle is stationary.
Notice
 Do not use on-board computer as a handle.
The on-board computer may become
irreparably damaged if you use it to lift the
pedelec.
 Remove the on-board computer from its mount
if the pedelec is not going to be used for
several weeks. Store the on-board computer
away safely in a dry environment at room
temperature.
The internal on-board computer battery
discharges when it is not in use. This can cause
damage to the internal on-board computer
battery.
 Charge internal on-board computer battery
every 3 months for at least 1 hour.
MY22Z01 - 12_1.0_25.07.2022

6.18.1 Using the USB port

Notice
Any moisture penetrating through the USB port
may trigger a short circuit in the on-board
computer.
 Regularly check the position of the rubber
cover on the USB port and adjust it as
necessary.
The USB port can be used to operate external
devices which can be connected using a standard
micro A/micro B USB 2.0 cable.
1 Open the protective flap on the USB port.
2 Replace the protective flap after using the USB
port.

6.18.2 Switching on the on-board computer

 Press the On-Off button (on-board computer)
briefly.
 The electric drive system is switched on.
6.18.3 Switching off the on-board
computer
If the on-board computer is not inserted into its
mount, it will switch off automatically after one
minute to save energy if no button is pressed.
 Press the On-Off button (on-board computer)
briefly.
 The electric drive system is switched off.
Operation
135

Advertisement

Table of Contents
loading

Table of Contents