On-Board Computer; Riding Light Indicator; Level Of Assistance Indicator - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

3.4.2

On-board computer

The on-board computer is operated using four
buttons on its casing and the buttons on the
control panel.
2 1
3
4
5
6
Figure 39: BOSCH Intuvia on-board computer layout
1 Riding light button
2 Info button (on-board computer)
3 RESET button
4 On-Off button (on-board computer)
5 On-board computer mount
6 On-board computer
7 USB port
8 USB port protective flap
The on-board computer has seven indicators:
4
5
6
5
7
Figure 40: Overview of on-board computer display screen
1 Riding light indicator, see Section
2 Level of assistance indicator, see
Section 3.4.2.2
3 Motor power used indicator, see
Section 3.4.2.4
4 Battery level indicator (on-board computer),
see Section 3.4.2.3
5 Gear recommendation indicator, see
Section 3.4.2.5
6 Tachometer display, see Section
7 Function display, see Section
MY22Z01 - 12_1.0_25.07.2022
7
8
TURBO
3
SPORT
TOUR
ECO
OFF
2
1
MPH
KM/H
AMM
PMWH
MIN
MPH
KM/H
3.4.2.1
3.4.2.6
3.4.2.7

3.4.2.1 Riding light indicator

The riding light indicator lights up when the riding
light is activated.

3.4.2.2 Level of assistance indicator

The higher the selected level of assistance is, the
more the electric drive system assists the rider
when pedalling. These levels of assistance are
available.
Level of assistance Use
Maximum assistance up to high
TU RB O
pedalling frequencies for sport riding.
Powerful assistance, for sport rides on
S P O R T mountainous rides and on urban
roads.
Constant assistance, for long-range
TO U R
tours.
Low assistance for maximum range
ECO
with maximum efficiency.
When the drive system is switched on,
the motor assistance is switched off.
O FF The pedelec can be used like a
normal bicycle by simply pedalling.
Push assist is disabled.
Table 12: Overview of levels of assistance, standard
The eM T B M O D E level of assistance is available
for Performance Line CX drives. In
eM T B M O D E Mode, the assistance factor and
the torque are adjusted dynamically, depending
on the pedalling force applied to the pedals. If the
pedelec has been configured with eM T B M O D E ,
eM T B M O D E will appear briefly when the
SPORT level of assistance is selected.
Level of assistance Use
Maximum assistance up to high
TU RB O
pedalling frequencies for sport riding.
Optimum assistance on any terrain,
eMTB sporty start-up, improved dynamics and
maximum performance.
Constant assistance, for long-range
TO U R
tours.
Low assistance for maximum range
ECO
with maximum efficiency.
When the drive system is switched on,
the motor assistance is switched off.
O FF The pedelec can be used like a normal
bicycle by simply pedalling. Push assist
is disabled.
Table 13: Overview of levels of assistance – eMTB mode
Description
47