Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions page 183

WARNING
!
Injury due to damaged brakes
Special tools and specialist knowledge are
required to repair the brakes. Incorrect or
unauthorised assembly can damage the brakes.
This may lead to an accident with serious injuries.
 Only specialist dealers may carry out repairs
on brakes.
 Only carry out work or changes, such as
dismantling, sanding or painting, which are
permitted and described in the brake operating
instructions.
Injury to the eyes
Problems may arise if the settings are not made
properly and you may sustain serious injuries as
a result.
 Always wear safety glasses during Inspection
and maintenance work.
CAUTION
!
Crash and falling caused by unintentional
activation
There is a risk of injury if the electric drive system
is activated unintentionally.
 Remove the battery before inspection or
maintenance.
Crash caused by material fatigue
If the service life of a component has expired, the
component may suddenly fail. This may cause a
crash with injuries.
 Have the specialist dealer carry out basic
cleaning of the pedelec every six months,
preferably at the same time as the required
servicing work.
MY22Z01 - 12_1.0_25.07.2022
Inspection and maintenance
CAUTION
!
Hazard for the environment due to toxic
substances
The brake system contains toxic and
environmentally harmful oils and lubricants. Such
fluids will contaminate if they enter the sewers or
groundwater.
 Dispose of lubricants and oils left over after
repairs in an environmentally responsible way
in accordance with statutory regulations.
Notice
The motor is maintenance-free and only qualified
specialist personnel may open it.
 Never open the motor.
8.4 Carry out initial inspection
Incorrectly fastened screws may come loose due
to impact. The stem may no longer be firmly fixed
in its position as a result. This will cause a crash
with injuries.
 Check the handlebars and the stem quick
release system are firmly in position after the
first two hours of riding.
Vibrations produced while riding can cause
screws and springs that were tightened during
manufacture of the pedelec to settle or come
loose.
1 Check quick release system is fixed in position.
2 Check all tightening torques of screws and
screw connections.
182