Switching The Push Assistance On/Off; Switching Bicycle Lights On/Off; Eshift (Optional) - Bosch Kiox Original Operating Instructions

English – 24

Switching the push assistance on/off

The push assistance aids you when pushing your eBike. The speed of this
function depends on the selected gear and can reach a maximum of
3.7 mph. The lower the selected gear, the lower the speed of the push assis-
tance function (at full power).
The push assistance function must only be used when pushing the
u
eBike. There is a risk of injury if the wheels of the eBike are not in contact
with the ground while using the push assistance.
To activate the push assistance function, briefly press button (13) on your
on-board computer. After activation, press the + button within three sec-
onds and keep it pressed. The eBike drive is switched on.
The push assistance is switched off as soon as one of the following occurs:
– You release the + button;
– The wheels of the eBike are locked (e.g. by applying the brakes or hitting
an obstacle);
– The speed exceeds 3.7 mph.
After releasing the + button, the push assistance remains on standby for an-
other three seconds. If you push the + button again within this time frame,
the pushing assistance will be reactivated.
Note: On some systems, the push assistance can be started directly by
pressing the WALK button.
Note: The push assistance cannot be activated at assistance level OFF.

Switching bicycle lights on/off

On the model in which the lighting is powered by the eBike system, the front
and rear lights can be switched on and off at the same time via the on-board
computer using the bike light button (3).
If the light is switched on, a symbol is displayed in the status bar of the dis-
play.
Switching the bike lights on and off has no effect on the backlighting of the
display.

eShift (optional)

eShift is the integration of electronic gear shifting systems into the eBike
system. The eShift components are electrically connected to the drive unit
1 270 U20 Ken | (13.11.2018) Bosch eBike Systems