Sensor Display/Adjustment (Sensor Adj); Temperature - Toshiba B-FP2D Series Key Operation Specification

7.7 Sensor Display/Adjustment (Sensor ADJ)

Contents of SENSOR ADJUST menu
MENU ITEM
7.Sensor ADJ

Temperature

Reflective
Transmissive
Paper End
Battery VOLT
Backlash1
Backlash2
<Supplemental Explanations>
 When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is
pressed.
 When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode menu.
 When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting, repeat
mode is enabled and the key pressed is repeatedly entered.
 The change in the parameter setting becomes effective when the [POWER] key is pressed after setting, then
stored in the backup memory.
7.7.1
The ambient temperature and print head temperature are displayed.
Only when the temperature is below zero, the symbol of minus (-) is displayed.
The display is updated every 200 msec.
The range of each temperature is below.
Ambient temperature
Print head temperature
Temperature
-21 to 71
-21 to 80
-95-