Sensor Display/Adjustment; Sensor Display/Adjustment Operation Example - Toshiba B-EP Series Key Operation Specification

6.6.6

Sensor Display/Adjustment

6.6.6.1

Sensor Display/Adjustment Operation Example

Power OFF
< 0 > S H U T D O W N
< 1 > D I A G N O S T I C
< 2 > M O D E
< 3 > P A R A M E T E R
< 4 > A D J U S T
< 5 > T E S T
< 6 > S E N S O R
[ P E E L . ]
H : + 2 0 ° C
[ R E F L E C T ]
[ R E F L E C T ]
[FEED] [POWER]
[PAUSE]
[PAUSE]
S E T T I N G
[PAUSE]
S E T
[PAUSE]
S E T
[PAUSE]
P R I N T
[PAUSE]
A D J U S T
[POWER]
A U T O
[POWER]
A : + 2 2 ° C
[POWER]
4 . 5 V
[PAUSE]
or
[FEED]
4 . 5 V *
[POWER]
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
(3) System mode menu display (Shutdown)
(4) Press the [PAUSE] key.
(5) System mode menu display (Self-test)
(6) Press the [PAUSE] key.
(7) System mode menu display
(Mode setting)
(8) Press the [PAUSE] key.
(9) System mode menu display
(Parameter setting)
(10) Press the [PAUSE] key.
(11) System mode menu display
(Fine adjustment value setting)
(12) Press the [PAUSE] key.
(13) System mode menu display (Test print)
(14) Press the [PAUSE] key.
(15) System mode menu display
(Sensor display/adjustment)
(16) Press the [POWER] key.
(17) Strip sensitivity adjustment
(18) Press the [POWER] key.
(19) Thermal head thermistor, ambient thermistor
A/D value display
(20) Press the [POWER] key.
(21) Reflective sensor A/D value display
Place a label paper in a manner so that the
sensor can detect it.
(22) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
(23) An asterisk "*" is displayed when the reflective
sensor adjustment is completed.
(24) Press the [POWER] key.
- 131 -