Beep Check (Beep); Xml Setting (Xml) - Toshiba B-FP2D Series Key Operation Specification

7.4.18
This setting selects BEEP sounds or not at turn ON, turn OFF, and error ocuured.

OFF

ON
Default value: ON
<Supplemental Explanations>
· When [FEED] and [PAUSE] key are input at the same time, it returns to the system mode men
u display.
· When parameter is set if pressing [FEED] key or [PAUSE] key for more than 0.5 seconds, repe
at mode is entered, and that key is continuously input.
· Parameter change becomes valid by entering the [POWER] key after setting and memory is bac
ked up.
· It can not adjust the volume.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.19

OFF

STD

ORACLE
Default value: OFF
<Supplemental Explanations>
If the XML setting is STD or ORACLE, issue mode is automatically changed to TPCL.
However, even when this setting is changed to OFF (disabled), the issue mode does not change, i.e.
TPCL is still selected.
* To use the re-issue function, the issue mode must be changed to TPCL1.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o

Beep check (Beep)

Beep is disabled.
Beep is disabled.
C Mode
o

XML Setting (XML)

XML setting is disabled.
Standard XML setting is enabled.
Oracle XML setting is enabled
C Mode
x
ESC/POS Z Mode
RECEIPT,RECEIP
T1
o o
ESC/POS Z Mode
RECEIPT,RECEIP
T1
x x
-75-
S Mode
o
S Mode
x