Paper End; Battery Voltage (Battery Volt); Backlash Step Count Adjustment 1 (Backlash1); Backlash Step Count Adjustment 2 / Backlash2 - Toshiba B-FP2D Series Key Operation Specification

7.7.4
Paper end level of the transmissive sensor and the reflective sensor is registered.
Remove any media from the media sensor.
The display of the currently detected value is updated every 200 msec.
Hold down the [FEED] key for 3 seconds or more.
When the registration of the "paper end level" is completed, "Adjust Complete" is displayed and an asterisk (*)
is shown on the right side of the voltage.
If the adjustment failed due to sensor failure, "SENSOR ERROR" is displayed and the STATUS LED blink.
The CHARGE LED turns off when the upper hierarchy menu is displayed.
The setting range is as below.
No paper
Reflective sensor
Transmissive sensor
7.7.5
The battery voltage is displayed.
7.7.6
This setting selects a backlash step count for a feed in forward direction.
Max. Min. value
value
99 00
Default value: 6
7.7.7
This setting selects a backlash step count for a feed in reverse direction.
Max. Min. value
value
99 00
Default value: 6

Paper End

Head (printer) side
Cover side
0.0V to 5.0 V
0.0V to 5.0 V

Battery Voltage (Battery VOLT)

Backlash Step Count Adjustment 1 (Backlash1)

Step Display
1 Decimal

Backlash Step Count Adjustment 2 / Backlash2

Step Display
1 Decimal
Sign Integer
digit
None 2
Sign Integer
digit
None 2
-97-
Decimal 0-padding
place
0 None
Decimal 0-padding
place
0 None
Unit of
measure
None
Unit of
measure
None