Stacker Selection; Threshold Manual Fine Adjustment For The Black Mark Sensor - Toshiba B-570 Maintenance Manual

6. DIAG. TEST OPERATION

6.3.12 Stacker Selection

< 1 >
D I A G N O S T I C
< 2 >
P A R A M E T E R
Press the [PAUSE] key fourteen times.
S T A C K E R
Press the [FEED] key or
[RESTART] key to select
ON or OFF to the stacker.
Press the [FEED] key
and [RESTART] key at
the same time.
NOTE: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed Stacker selection is stored in memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [PAUSE] key.
S E T
T
S Y S E M
V 1 . O A
O F F
[FEED] key:
ON: Stacker is used.
[RESTART] key:
OFF: Stacker is not used.
Press the [PAUSE] key.
Continued on Section
6.3.13 Threshold Manual
Fine Adjustment for the
Black Mark Sensor.
6-32
EM18-33010A
SVO8A1002 : Jan. 19, '98
6.3 PARAMETER SETTING MODE