Reflective; Transmissive - Toshiba B-FP2D Series Key Operation Specification

7.7.2
Tag paper
The sensor level of the reflective sensor is registered.
Place the tag paper to be used on the reflective sensor so that the sensor can detect a print area.
The display of the currently detected value is updated every 200 msec.
Hold down the [FEED] key for 3 seconds or more.
When the registration of the "print area level" is completed, "Adjustment Complete" is displayed and an asterisk
(*) is shown on the right side of the voltage.
If the adjustment failed due to sensor failure, "SENSOR ERROR" is displayed and the ERROR LED turns on.
The ERROR LED turns off when the upper hierarchy menu is displayed.
The setting range is as below.
Reflective sensor
7.7.3
The sensor level of the transmissive sensor is registered.
Remove some labels and place the backing paper so that the Transmissive sensor can detect it.
The display of the currently detected value is updated every 200 msec.
Hold down the [FEED] key for 3 seconds or more.
When the registration of the "label gap level" is completed, "Adjustment Complete" is displayed and an asterisk
(*) is shown on the right side of the voltage.
If the adjustment failed due to sensor failure, "SENSOR ERROR" is displayed and the ERROR LED turns on.
The ERROR LED turns off when the upper hierarchy menu is displayed.
The setting range is as below.
Transmissive sensor

Reflective

Head (printer) side
Reflects
Cover side
0.0V to 5.0 V

Transmissive

Head (printer) side
Backing paper
Transmits
Cover side
0.0V to 5.0 V
-96-